Compact Treatment System - CPS
SKE CPS Range of combined treatment systems integrates screening and grit separation with the option of fat, oil & grease (FOG) removal, all within a single package unit. The CPS equipment range is supplied for direct installation onto prepared level ground on your site.
Constructed out of high quality AISI 304 stainless steel to ensure years of trouble free operation. Optional extras include stainless steel 316 construction, bypass rake screen and continuous bagging systems to receive screenings and grit. This allows odours and the screenings to be sealed without any personal contact.
The CPS range includes two variants, CPS 2 and CPS 3. CPS 2 integrates two treatment sections; screening and grit / sand separation. The CPS 3 range incorporates the CPS 2 sections plus a further treatment section for FOG removal. Both variants may be fitted with air diffusers to impart improved separation of attached organic matter from the grit and sand particles. With the CPS 3, this will also enhance flotation and removal of FOG which can then be drawn off and disposed of into a separate container.
Waste water enters the screen section where gross solids are removed from the flow, washed, compacted and dewatered. Depending upon the solid properties, a volume reduction of around 40% dry solids or greater with organic washing efficiencies > 90% can be achieved prior to discharging the screenings into a container. The screened effluent then discharges to a hopper section where grit and sand settlement is induced. The grit is conveyed to a grit classifier and can be further washed prior to dewatering and disposal into a container.
Interested? Get in touch...
BACK TO PRE-TREATMENT, TREATMENT & GRIT HANDLING - DERITOR